AUSTROMAT 674 baSiC2
The SiC-heating concept for every kind of milled dental prosthesis sintered under atmosphere for as many as approximately forty parts per level. Three heating elements realize a homogeneous temperature distribution up to as high as 1.530 °C. Remote control and quality management are optionally integrated and provide a reliable partner of your milling or grinding machine.
FURNACE FOR SINTERING COPINGS UP TO 100 MM IN DIAMETER
The AUSTROMAT 674 baSiC2 is equipped with three silicon carbide heating elements, perfectly fitting for sintering at temperatures up to 1.530 °C. These heating elements feature robustness and durability and won’t discolor copings.
The firing chamber is closed through the vibration free lift system. The AUSTROMAT 674 baSiC2 also uses our unique, well-established system, to realize safely shortest sintering durations with highest heating and cooling rates. This so-called AutoDry system controls temperature gradients through lift movement, dependent on chamber temperature. On each sintering level approximately forty sintering units can be placed. Equip the furnace with two levels to reach highest throughput. Diameters of sintering goods may reach up to 100mm.
Sintering programs are already factory preset, loaded through a thumb drive or optionally downloaded from the huge DEKEMA sintering program internet data base. Optionally these cycles might even be programmed by one click QR scanning. The furnace is operated through its large 7.5″ touch panel. It also shows the state of the furnace and all relevant data.
The sintering fl agship, especially designed for sintering huge amounts of milled dental restorations. Three SiC heating elements ensure an even
temperature distribution inside the sintering chamber. Process safety and traceability is already integrated through quality management modules and internet connectivity for remote access.
FURNACE FOR SINTERING COPINGS UP TO 1.600 °C
Large milling centers all over the world cherish the efficiency of the AUSTROMAT µSiC; efficiency in throughput, efficiency in energy consumption, efficiency through reliability.
Several levels of diameters up to 100 mm can be placed on top the multilayered insulation table, up to a height of 150 mm; thus, sintering of more than 120 units is possible at a time. Discoloration can be neglected through the use of clean SiC heating technology. Energy saving heating and cooling processes extremely reduce sintering times. Depending on the material, typically around 70 % shorter cycles can be realized as with conventional heating techniques in standard high temperature ovens. This is future-oriented, eco-sensitive state-of-the-art technology for the process safety of tomorrow’s digital dental laboratory.
Editing and programming functions allow generation of incredible sintering cycles. The network compatible AUSTROMAT µSiC can remotely be operated. Use your mobile device or let us diagnose the unit remotely. Use a QR reader to optionally one button program or safely start a cycle. Even during program run you remotely may adapt data. Comprehensive backup and recovery functions and power failure features round up this furnace.
The SiC-heating concept for every kind of milled dental prosthesis sintered under atmosphere for as many as approximately 30 parts. Two heating elements realize a homogeneous temperature distribution up to as high as 1.560 °C. Remote control and quality management are already integrated and provide a reliable partner of your milling or grinding machine.
FURNACE FOR SINTERING COPINGS UP TO 1.560 °C
The AUSTROMAT baSiC is equipped with two silicon carbide heating elements, perfectly fitting for sintering at temperatures up to 1.560 °C. These heating elements feature robustness and durability and won’t discolor copings.
The bottom part of the two-part fi ring chamber is manually drawn out by a drawer for loading and unloading. The drawer must be closed for the lift to join or separate the two halves of the fi ring chamber. The lift movement can be controlled temperature dependently, what harmlessly allows shortest sintering times. The sintering platform provides space for approximately 30 sintering units and a maximum diameter for copings of 100 mm.
Sintering programs are already factory preset, loaded through a thumb drive or directly downloaded from the huge DEKEMA sintering program internet data base. Optionally these cycles might even be programmed by one click QR scanning. The USB terminal is used to choose sintering cycles. Its central display shows the state of the furnace and all relevant data.
AUSTROMAT 664 iSiC
Merging user-oriented operation, short sintering cycles, low energy consumption and a very small footprint? Materialized through the AUSTROMAT 664 iSiC, the DEKEMA specific SiC heating technology makes it possible. Approximately forty copings or restorations with up to six units can by reliably sintered in one cycle with up to 1.530 °C.
FURNACE FOR SINTERING COPINGS UP TO 1.530 °C
The high temperature furnace AUSTROMAT 664 iSiC is equipped with two silicon carbide heating elements to safely and consistently operate at temperatures up to 1.530 °C. All components of the AUSTROMAT 664 iSiC sintering chamber are made of highest purity, durable materials to ensure very homogeneous heat distribution in a clean atmosphere.
A patent pending, DEKEMA specifi c Platin/Platin Rhodium thermocouple monitors the temperature inside the sintering chamber. Approximately 15 copings with a maximum diameter of 65 mm might be simultaneously sintered on top of the patented insulation table,
optionally in two levels doubling capacity. Our time tested AUTODRY system has been further improved, providing both, precise drying steps, as well as quick and direct heating and cooling steps, for extremely short sintering cycles.
AUSTROMAT 654 press-i-dent
This working horse is equipped with the innovative, controlled, electromechanical upwards-pressing propulsion. It opens the mind of the dental
technician to a new world of unique pressing possibilities. Multicolor multi ingot pressings supply efficiency you not even dreamed of. And still it is equipped with a closed fi ring chamber. No hole on top, no cold spots, delivering the homogeneous temperature distribution, needed to perfectly fire every layered dental restoration.
COMBI FURNACE FOR FIRING AND PRESSING WITH ONE- OR MULTI-PLUNGER-RING-SYSTEMS
Pressing several colors with multiple plungers in one ring; Press without vacuum, Quick cooling steps during pressing; firing high and low fusion dental ceramics towards highest customer satisfaction. Only one furnace unites these properties: The AUSTROMAT 654 press-i-dent. Ensured by the closed thermal insulation system, absolutely unique for pressing furnaces. And made possible through its further developed, further optimized upwards-pressing propulsion, which has been invented especially for furnaces of the press-i-dent kind. Epic in precision and accuracy.
Operation, user guidance or editor, are identical to the AUSTROMAT 624/644. And surely functionality has even been extended. You feel immediately at home. No matter, whether you want to operate the furnace through his large, high resolution touch screen, or, as an option,
remotely through the network.
The reliable firing furnace, expanded to a combi furnace for firing and pressing. Fire your dental restorations as usual. Press with the patented vacuum pressing system. It works independently of an external compressed air supply. It perfectly suits to excellent pressings with any one plunger ring system.
COMBI FURNACE FOR FIRING AND PRESSING WITH ONE-PLUNGER-RING-SYSTEMS
Ambient pressure is cleverly exploited to reliably press with the AUSTROMAT 644. This patented, high resolution process even allows controlled pressings at diff erent, pre-defined press forces. Standard ring systems of any press ceramics’ supplier with diameters up to 70 mm and total heights up to 88 mm can be processed under vacuum inside the pressing chamber.
The AUSTROMAT 644 has been built upon the AUSTROMAT 624. Therefore this unit joins all the merits of the ceramic fi ring furnace with extra class pressing functionality. Whether touch screen or optional network access. This furnace has already been loaded with all the equipment to future-oriented escort the dental technician on his way towards to the digital dental laboratory.
The proven firing chamber concept assures excellent firing results within all temperature ranges. The combination of the intuitive user interface
and an internet capable electronics ideally adapts to the practical needs of the modern dental technician. The focus is readjusted on the dental
technician’s daily work.
FURNACE FOR FIRING DENTAL CERAMICS
The AUSTROMAT 624 merges our firing experience with a control, leaving nothing to be desired.
The furnace is operated through a high resolution touch screen. Different data in- and output possibilities, as well as several program editing functions perfectly adapt to the Individual requirements of any dental technician. Start one of the 200 active programs just by pushing one button. The program may be changed during operation, optionally even remotely over the network. In the background you may store a more or less unlimited quantity of programs inside the furnace’s data base.
Since decades DEKEMA has used virtually the same firing chamber. That’s the pivot for outstanding fi ring results in all temperature ranges. It’s one of our major principles that changes on modules have to lead to further optimized fi ring results. Costs on most important parts have to be an also-ran.