)
AUSTROMAT D2HD: Infiltration programs or long-term sintering processes may be individually saved on 4 levels in 120 firing programs. The menus allow you easily edit, save and copy programs by pressing a key. The high-quality insulation ensures accurate long-term temperature distribution. The automated self-check by the 32-bit electronics of the AUSTROMAT D series by DEKEMA ensures perfect firing monitoring and maximum reliability.
Start-over: On starting, it is possible at any time to select the current chamber temperature as the start temperature. This dispenses with long cool-down times.
Easy programming and operation: The menu guides you through a fixed program sequence with freely-settable value ranges.
| Range | Interval | Unit | |
| Start temperature/ preheating temperature | 50 to 700 | 5 | °C |
| Closed time | 00:00 to 99:59 | up to 00:30 in 00:01 from 00:30 in 00:05 from 05:00 in 00:10 |
h:min |
| Preheating time | 00:00 to 99:59 | up to 00:30 in 00:01 from 00:30 in 00:05 from 05:00 in 00:10 |
h:min |
| Temperature increase | 2 to 99 or max. | 1 | °C/min |
| Final temperature/ firing temperature | 100 to 1200 | 1 | °C |
| Holding period | 00:00 to 99:59 | up to 00:30 in 00:01 from 00:30 in 00:05 from 05:00 in 00:10 |
h:min |
| Cooling temperature | 90% of end temperature | ||
| Cooling time | 0 to 9 | 1 | min |
| Relaxation temperature | 65% of end temperature | ||
| Relaxation time | 0 to 9 | 1 | min |
| Cooling to roomtemperature with closed firing chamber | |||
Changing the running program: The firing parameters can be changed with the press of a key while the current program is running and saved if desired.
Automatic self-test: Internal test routines seamlessly monitor the temperature and vacuum while the program is running.
Check program: An automatic diagnosis routine is integrated for all system components to determine the service intervals.
Setup functions: Setup functions enable user-defined adaptation of a wide variety of options such as display contrast, record printout, saving data on the computer, general code, temperature calibration, acoustic signal, date and time, ID, Data transfer, update fix programs, language, °C/°F changeover, check program, battery change, diagnosis data, printing programs, service functions for maintenance
Software update via memory modules: Plug-in modules save the firing programs and simplify updating the device software.
Scope of delivery: AUSTROMAT D2HD ceramic furnace , firing table, tweezers, soft module, operating instructions, RS232 computer interface, individualized paint job and memo module upon request.
Technical data: 220-240 V, 110-120 V or 95-105 V, 50-60 Hz, max. 1450 W, 612 mm x 380 mm x 340 mm (HxWxD), 17.5 kg.